Share
  • Zählertyp Full Auto Absperr- DC32V; hebel starten Akkuschrauber mit Gegenstromversorgung

Zählertyp Full Auto Absperr- DC32V; hebel starten Akkuschrauber mit Gegenstromversorgung

Model : EA-C203L;C207L;C210L

COUNTER TYPE FULL AUTO SHUT- OFF DC32V; LEVER-START ELECTRIC SCREWDRIVER WITH COUNTER POWER SUPPLY(#SP-C32HL60T/C)

Model # EA-C203L

# EA-C207L

# EA-C210L

 

Weight: 270g (0.59 lb)

Length: 205mm (8.1")

Power source: DC20V or 32V

Bit Type: HEX 6.35mm/ Ø4mm

 

 

 

Model # EA-C203L

Torque Range: 0.2-3.5 kgf-cm

(0.18-3.08 lbf-in; 0.02-0.34 N.m)

Uploaded Speed:

1000 r.p.m. (HIGH); 600 r.p.m. (LOW)

Available Screw Machine Screw Ø:

1.0-2.3mm (0.04-0.09")

Available Screw Tapping Screw Ø:

1.0-2.0 mm (0.04-0.08")

 

 

 

Model # EA-C207L

Torque Range: 0.5-7.0 kgf-cm

(0.44-6.16 lbf-in; 0.05-0.69 N.m)

Uploaded Speed:

1000 r.p.m. (HIGH); 600 r.p.m. (LOW)

Available Screw Machine Screw Ø:

1.4-2.6mm (0.06-0.10")

Available Screw Tapping Screw Ø:

1.4-2.3 mm (0.06-0.09")

 

 

 

Model # EA-C210L

Torque Range: 1.0-10 kgf-cm

(0.88-8.8 lbf-in; 0.1-0.98 N.m)

Uploaded Speed:

670 r.p.m. (HIGH); 400 r.p.m. (LOW)

Available Screw Machine Screw Ø:

1.6-3.0mm (0.06-0.12")

Available Screw Tapping Screw Ø:

1.6-2.6mm (0.06-0.10")

 

 

 

Features-

* Convenience design combine power supply and screw counter.

* Compatible with PLC based process control system; accurate counting on screw fastening.

* Auto leaning function built-in could judge the best setting value.

* Able to setting running speed & timing by Slow-Start function.

* Election on auto-reset retrieval or manual reset retrieval.

* Enhances the auto-identified screw fastening time mode; allow user to aim at simulating the duration of specific screw fastening.

* Displaying the number of unfinished screw counts; user can add external sensor switch to prevent operation error.

* Buzzer alert while complete afastening cycle. Internal signal for detecting screw count is also able to connect external devices.

* Capable with output and input signal; accurate calculation through the signal of sensor to prevent improper operation. Suitable for semi or full automatic production line.

Verwandte Produkte

Air Ratchet Wrench, 82 Nm, 160 rpm

Model : ST-RW5004

Air Close Head Ratchet Wrench, 82 Nm. 180 rpm.

Model : ST-M3003T

Pistol Type Two Pinless Hammer Air Impact Screwdriver, 68 Nm, 10000 rpm

Model : ST-SD500

Triple Hammer Air Impact Wrench w/6" Anvil-2,169 Nm, 4,500 rpm

Model : ST-IW0880,ST-IW0880-6

Twin Hammer Air Impact Wrench-2,033 Nm, 4,500 rpm

Model : ST-5808,ST-5808-6

Flexible Angle Head Design Air Angle Sander/Polisher- 0.4HP

Model : ST-AS71N2H,ST-AS71N3H,ST-AS72N2H,ST-AS72N3H,ST-AP7102H,ST-AP7103H,ST-DG7102L,ST-DG7106L