Digital Screw Counter Function V4 Brushless Power Supply
*
Convenience design combine power supply and screw counter.
* Compatible with PLC based process control system; accurate counting on screw fastening.
* Auto leaning function built-in could judge the best setting value.
* Able to setting running speed & timing by Slow-Start function.
* Selection on auto-reset retrieval or manual reset retrieval.
* Enhances the auto-identified screw fastening time mode, allow user to aim at simulating the duration of specific screw fastening.
* Displaying the number of unfinished screw counts, user can add external sensor switch to prevent operation error.
* Buzzer alert while complete a fastening cycle. Internal signal for detecting screw count is also able to connect external devices.
* Capable with output and input signal; accurate calculation through the signal of sensor to prevent improper operation. Suitable for semi or full automatic production line.
BRUSHLESS POWER SUPPLY INTEGRATE WITH SCREW COUNTER
(WITH CE/UL CERTIFICATED)(6 PIN) ~ Function Upgrade - V4.0
Model # SP-BC40HL501T/C6
|
Model # |
SP-BC40HL501T/C6 |
|
Input Voltage |
AC 100-240V, 50/60HZ |
|
Output Voltage |
DC 40V/32V/24V |
|
Count |
1- 99 |
|
Count Method |
Count-up / Count-down |
|
Reverse Resuming |
ON / OFF |
|
Work with Sensor |
ON / OFF |
|
GATE Sensor |
ON (2 Sensor) / OFF (1 Sensor) |
|
Slow-Start Time Adjustable |
0- 9.9 seconds |
|
Slow-Start Speed Adjustable |
Lo: 100%
L1-L9: 35%-85% Rated speed |
|
Running Time Limit - LO |
0.0- 9.9 seconds |
|
Running Time Limit - HI |
0.0- 9.9 seconds |
|
Reminder Mode |
On / OFF / FF / EF
with LED and buzzer |
|
Auto ZERO |
ON / OFF |
|
Screwdriver Control |
HI / LO: Slow-Start |
|
Dimensions |
247x130x |
|
Weight |
2.4 kgs |
* POWER SUPPLY WITH CE CERTIFICATED
* Recommend: To be ordered with the screwdriver together
Suitable Model:EA-BN203 ~ EA-BN650
EA-BAN960 ~ BTN9180
0.2~
